PNEUMATIC TAB BENDER TOOL

RR-Series Pneumatic Tab Bending Tool for Railcar Axel Bearing Caps

FOLDS THE LOCKING TABS ON RAILCAR AXLE BEARING CAP SCREWS

The Model RR-Series Pneumatic Tools are designed to quickly and easily fold the locking tabs used under the mounting cap screws when installing the axel bearing cap screws.­ These tools operate on standard shop air (80-110 psi) and are designed to meet the rigorous requirements of railroad wheel shops.­ Models available for 1/2" thru 1-1/4" cap screws.­

Model #RR-500: 1/2" Cap Screw

Model #RR-625: 5/8" - 3/4" Cap Screw

Model #RR-875: 7/8" Cap Screw

Model #RR-1000: 1" - 1-1/8" Cap Screw

Model #RR-1250: 1-1/4" Cap Screw

­

RR-Series Pneumatic Tab Bending Tool­­ ­ ­ ­­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­­RR-Series Pneumatic Tool to Bend Locking Tabs on Railcar Axel Bearing Caps­­

Pneumatic Tab Bending Tool Catalog.pdf

­­­­ ­ RR-1000 Pneumatic Tab Bending Tool Video

Information request form


Wheel Mounting Lubricant for Railcar Wheels

LB-0749 Wheel Mount Lubricant for railcar wheels and axels

LUBRICANT TO PRESS FIT RAILCAR WHEELS ONTO AXELS

AAR APPROVED LUBRICANT SINCE 1987

­

> Packaging: 1-Gal cans (4/case) or 5-Gal pails

> Applied by brush, roll or spray

> Visconsity: Very fluid

> Odor: Mild

> Soluability: Insoluable in water

> Effective with wide range of axle surface finishes

­


The LB-0749 Wheel Mount compound is classified as a non-hazardous material for shipping purposes.­ However, please note the special precautions noted on the data sheet and MSDS sheet for storing and disposing of contaminated rags.­ As a linseed oil base compound, spontaneous combustion is possible under certain conditions.­ We recommend that contaminated rags be stored in a water filled container to keep them wet prior to disposal.

­

Review data sheet and MSDS below for use

LB-0749 Product Data Sheet.pdf

LB-0749 MSDS Sheet.pdf

Information request form

 

Wheel Mount Compound for press fitting rail car wheels to axles.

WHEEL MOUNT LUBRICANT - PRESS FIT RAIL CAR WHEELS

 

AAR APPROVED LUBRICANT SINCE 1987

  • Packaging: 1-Gal cans (4/case) or 5-Gal pails
  • Applied by brush, roll or spray
  • Visconsity: Very fluid
  • Odor: Mild
  • Soluability: Insoluable in water
  • Effective with wide range of axle surface finishes
  • Review data sheet and MSDS before use.

LB-0749 Wheel Mount Compound, 1-Gallon Can
LB 0749 Wheel Mount Compound, 1 Gallon Can

­
The LB-0749 Wheel Mount compound is classified as a non-hazardous material for shipping purposes.­ However, please note the special precautions noted on the data sheet and MSDS sheet for storing and disposing of contaminated rags.­ As a linseed oil base compound, spontaneous combustion is possible under certain conditions.­ We recommend that contaminated rags be stored in a water filled container to keep them wet prior to disposal.
LB-0749 DATA & MSDS DOCUMENTS

LB-0749 DATA SHEET

LB-0749 SDS-2017

Information request form

­