GOWNING RACKS

Freestanding Gowning Racks with Wire Shelving Components

Frame construction from wire shelf components in stainless steel or chrome plating. 1˝-diameter posts grooved on 1˝ increments. Hanger bars featuring 2 1⁄2˝ centered slots, hooks on 1 1⁄2˝ centers staggered vertically, or 1˝-diameter hanger tube are adaptations for storing gowns. Hangers not included.

Freestanding Gowning Racks with Hanger Rail

1 1⁄2˝ welded tube frame is shipped knocked-down and bolted together with cross members. Electropolished or brushed 300 series stainless steel. Available with or without domed cap that secures hangers to hanger rail, preventing hanger removal. Nylon dissipative feet standard. Hanger slots are standard on 3˝ centers, with other spacing available. Hangers not included.

Wall Mounted Gowning Racks

Racks with Hanger Slots: Hanger slots on 2 1⁄2˝ centers. Hanger bar suspended from 24˝-wide wire shelf, 48˝ to 72˝ in length. Electropolished stainless or chrome plated finish.

Racks with Hooks: High density storage with hooks on 1 1⁄2˝ centers staggered vertically for accessibility. 14˝-wide by 48˝–72˝ length. Chrome plated or electropolished stainless steel.

Racks with Hanger Tube: 1˝-diameter tube suspended from an 18˝-deep wire shelf 48˝–72˝ in length. Chrome plated or brush stainless steel.

 

 

Freestanding Gowning Racks with Wire Shelving Components

Racks with Hanger Slots

Hanger bar constructed of heavy gauge type 304 stainless steel with hanger slots spaced on 21⁄2˝ (64mm) centers.

1˝ (25mm) square 3-sided frame along the bottom.

Finishes available are chrome and electropolished finish.

Racks with hooks

Top wire shelf features 2 gauge hooks welded to underside of top wire shelf.

Standard wire undershelf.

Finishes available are chrome and electropolished finish.


Racks with hanger tube

 1˝ (25mm)-diameter full-length hanger tube, grooved at 1˝ (25mm) increments, is suspended on underside of wire shelf via two 2-gauge hooks, one on each end.

1˝ (25mm) square H-frame along the bottom.

Finishes available are chrome and stainless steel finish.


Wire Shelving Components

 All units feature wire shelf with patented QuadTruss® construction (patent #5,390,803):

– Top mat assembly constructed of 10 gauge mat wires welded to full-length 6 gauge inside support wires and serpentine trusses.

– At front and rear of shelf, mat wires are welded to a four-wire truss assembly constructed of a 2 gauge bottom wire, a 6 gauge serpentine truss wire which creates a bridge-like reinforcement, and two 6 gauge top wires—one directly below mat wires and one directly above, providing a pincer hold on mat wires.

Posts are 1˝ (25mm) diameter, grooved on 1˝ (25mm) increments, and provided with leveling feet.
Optional foot plates available to affix gowning rack to the floor.

 

Freestanding Gowning Racks with Hanger Rail

 

14 gauge hanger rails with hanger slots spaced on standard 3˝ (76mm) centers. Slots designed to retain gowns in a fixed position by allowing the hangers (not included) to swing front-to-back but not left-to-right, while the shape facilitates a smoother laminar flow than many square hanger rails.

Vertical supports are constructed of heavy gauge type 304 stainless steel 11⁄2˝ (38mm) square tubing, fully welded, ground and polished to its original finish. Each unit is supplied with four adjustable feet that are constructed to dissipate a static charge.

Horizontal supports are bolted to vertical uprights using stainless steel bolts. Constructed of 1˝ (25mm) O.D. type 304 stainless steel tubing with heavy gauge stainless steel backing plate. The bolts are covered with a stainless steel cap to eliminate any crevasses in which dust might settle.

Hanger rail is constructed of heavy gauge type 304 stainless steel with hanger slots located every 3˝ (76mm) along the length of the rail.
Other spacing available .

Standard 2˝ (51mm)-diameter, nylon dissipative feet with 1⁄2˝ (13mm) adjustability. Optional foot plates available to affix gowning rack to the floor.

Available with non-removable hanger construction— A domed cap over the hanger rail secures hangers (not included) and prevents removal.

Finishes available are 304 series stainless steel with #4 satin or electropolished finish.

Single, dual, and cantilever styles available.

Shipped knocked-down, saving in freight costs and damages.

 

Wall Mounted Gowning Racks

 

Ideal for garment storage when floor space is not available.

All units feature top wire shelf with patented QuadTruss® design (patent #5,390,803).

Open-wire construction promotes laminar flow.

Mounts easily to wall.


Racks with Hanger Slots

Hanger bar constructed of heavy gauge type 304 stainless steel with hanger slots spaced on 21⁄2˝ (64mm) centers.

 Available in chrome plated steel and electropolished stainless steel finish.

 Plastic shelf markers available.


Racks with Hooks

Hooks, spaced on 11⁄2˝ (38mm) centers, are staggered vertically for ease of access.

All-welded construction.

Available in chrome plated steel and electropolished stainless steel finish.


Racks with Hanger Tube

1˝ (25mm)-diameter full-length hanger tube, grooved at 1˝ (25mm) increments, is suspended on underside of wire shelf via two 2-gauge hooks, one on each end.

Available in chrome plated and stainless steel finish.

Plastic shelf markers available.

 

Contact Custom Products & Services, Inc. at 888-444-1202 or email: sales@custom-products.com

Gowning Racks Data Sheets below:

Freestanding Gowning Racks with Wire Shelving Components.pdf

Freestanding Gowning Racks with Hanger Rail.pdf

Wall Mounted Gowning Racks.pdf